NSN 5305-01-411-5113
High Torque Screw
Between 1.438 inches and 1.468 inches fastener length, flat countersunk head style, between 0.692 inches and 0.763 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS7306A14 for national stock number 5305014115113.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-411-5113.
-
MPN or Model
NAS7306A14
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 1.438 inches and 1.468 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.692 inches and 0.763 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7306 professional/industrial association standard
More from these suppliers
- 5940-00-581-9782 MPN NAS707G3Stud Terminal
- 5940-01-451-2679 MPN NAS1063E3-551ETerminal Board Marker Strip
- 5940-01-455-2460 MPN NAS1063A10-105BDTerminal Board Marker Strip
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5935-01-608-5882 MPN 3181-12NAElectrical Connector Cover
- 5305-00-003-9208 MPN NAS1189-6T10LSocket Head Cap Screw
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-411-5113 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |
NAS7306A14 | National Aerospace Standards |