NSN 5305-01-437-4999
High Torque Screw
Grip chamfer at threads 35.0 degrees.
Manufacturer part number SC2657-4-7P for national stock number 5305014374999.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-437-4999.
-
MPN or Model
SC2657-4-7P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.318 inches -
Fastener Length
Between 0.730 inches and 0.760 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
95000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-182-9410 MPN CVC241A4-20Machine Screw
- 5305-01-014-2588 MPN S5008-3-2Close Tolerance Screw
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
- 5305-01-054-6237 MPN C9535-6-21Close Tolerance Screw
- 5305-01-142-9423 MPN HT4020-4-8AYShoulder Screw
- 5305-01-211-3109 MPN HT4060V3-12Shoulder Screw
- 5305-01-215-7285 MPN 3M1034V4-8-21Close Tolerance Screw
- 5305-01-283-4635 MPN BACB30LU3-3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-437-4999 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC2657-4-7P | Arconic Global Fasteners & Rings, |
S00464-4-7P | Boeing Company, The |
SC2657-4-7P | Arconic Global Fasteners & Rings, |
S00464-4-7P | Boeing Company, The |