NSN 5305-01-458-6543
High Torque Screw
Between 0.473 inches and 0.503 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number C20645-3-2 for national stock number 5305014586543.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-458-6543.
-
MPN or Model
C20645-3-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.353 inches and 0.373 inches -
Fastener Length
Between 0.473 inches and 0.503 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-526-6637 MPN 3M1170V4-14AClose Tolerance Screw
- 5306-00-081-6591 MPN VFK100G-10024Shear Bolt
- 5306-01-005-0463 MPN VAL23033-6H8Shear Bolt
- 5306-01-045-8949 MPN 68A870642-2003Eye Bolt
- 5306-01-160-7560 MPN BACB30NE4-21Close Tolerance Bolt
- 5306-01-196-8072 MPN VFK600-6H24Shear Bolt
- 5306-01-203-0900 MPN VAL23033-3-7Shear Bolt
- 5306-01-207-0196 MPN VAL23033-4D11XShoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-458-6543 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C20645-3-2 | Lockheed Martin Corporation |
C20645-3-2 | Valley-todeco, Inc. |
C20645-3-2 | B & B Specialties Inc. |
AIC618-3-2 | Sps Technologies, Llc |
93926-3-2 | Sps Technologies, Llc |
93926-3-2 | Sps Technologies, Llc |
GS1009-3-2 | B & B Specialties Inc. |
Stock Check
- NE: 1924
- NS: 81