NSN 5305-01-477-5622
High Torque Screw
Flat countersunk undercut head style, between 0.629 inches and 0.634 inches head diameter, between 0.088 inches and 0.090 inches head height, internal drive style: high-torque.
Manufacturer part number HT4020-5-8A for national stock number 5305014775622.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-477-5622.
-
MPN or Model
HT4020-5-8A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.629 inches and 0.634 inches -
Head Height
Between 0.088 inches and 0.090 inches -
Internal Drive Style
High-torque -
End Application
Fighter aircraft-first (f18 e/f) -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Criticality Code Justification
Agav -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-063-5057 MPN BACB30LK3U2Close Tolerance Screw
- 5306-00-541-9490 MPN VAL23029-6D19Close Tolerance Bolt
- 5306-00-960-5455 MPN BACB30LJ4DU15Close Tolerance Bolt
- 5306-01-044-0737 MPN VAL22034-7FS18Shear Bolt
- 5306-01-171-8097 MPN VAL23029-6-10Close Tolerance Bolt
- 5306-01-214-5958 MPN BACB30LE4HU5Shear Bolt
- 5306-01-246-9800 MPN VCG0002-5-9Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-477-5622 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-5-8A | Hi-shear Corporation |
HT4020-5-8A | Lisi Aerospace Canada Corp |
ST3M652C5-8A | Boeing Company, The |
11925C5-8A | Reid Products Inc. |
HT4020-5-8A | Sps Technologies Inc |
ST3M652C5-8A | Valley-todeco, Inc. |
HT4020-5-8A | Sps Technologies, Llc |
HT4020-5-8A | Arconic Global Fasteners & Rings, |
ST3M652C5-8A | Heartland Precision Fasteners, Inc. |
HT4020-5-8A | Huck International, Inc. |
HT4020-5-8A | Sps Technologies, Llc |
HT4020-5-8A | Sps Technologies, Llc |
ST3M652C5-8A | Fastener Innovation Technology, Inc. |
HT4020-5-8A | Sps Technologies, Llc |
HT4020-5-8A | Alcoa Global Fasteners, Inc. |
HT4020-5-8A | Sps Technologies Ltd Tj Brooks |
ST3M652C5-8A | Houston Precision Fasteners I, Lp |
WC4020-5-8A | West Coast Aerospace Inc |