NSN 5305-01-520-9391
High Torque Screw
This screw is intended for applications which require the six lobe recess; has undrilled shank.
Manufacturer part number 120-265E3-3 for national stock number 5305015209391.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-520-9391.
-
MPN or Model
120-265E3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.260 inches -
Fastener Length
0.464 inches -
Head Style
Flat countersunk -
Head Diameter
0.380 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
0.189 inches -
Internal Drive Style
Torx -
End Application
Mv-22 aircraft (v-22 lrip 1 e-nsn isil) -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Screw, shear, flat 100 degrees head, close tolerance, short thread, six lobe recess, 95 ksi fsu -
Material
Iron alloy 660 -
Material Specification
Ams5731 federal specification 1st material response or ams5732 federal specification 2nd material response or ams5737 federal specification 3rd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams-qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5306-01-142-3545 MPN HP5507-4D94Shoulder Bolt
- 5306-01-142-7180 MPN HP5497-4-42Shoulder Bolt
- 5306-01-526-3884 MPN ST3M744-6D21Close Toleranc Bolt
- 5306-01-562-2611 MPN 3M1277E3D9AAircraft Eddie Bolt
- 5306-01-648-5480 MPN NAS6806HU6Shear Bolt
- 5320-01-131-6824 MPN HP4761-5-8Pin-rivet
- 5320-01-166-3670 MPN HP4923C3-8-5Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-520-9391 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-265E3-3 | Bell Helicopter Textron Inc. |
120-265E3-3 | Heartland Precision Fasteners, Inc. |
120-265E3-3 | Sps Technologies, Llc |