NSN 5305-01-591-0195
High Torque Screw
Item has a dry film lube applied to the shank and the threads only with 100 percent coverage of threads and 80 to 100 percent coverage of the shank length.
Manufacturer part number HT4027-7-12M for national stock number 5305015910195.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-591-0195.
-
MPN or Model
HT4027-7-12M
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 1.641 inches and 1.671 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.612 inches and 0.672 inches -
Head Height
0.020 inches -
Grip Diameter
0.437 inches -
Point Length
0.062 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Point Chamfer Angle
45.0 of standard range single treatment response -
Part Name Assigned By Controlling Agency
Screw-close tolerance, 100 degrees countersunk, reduced head, hi-torque, non-magnetic cres (125 ksi fsu) -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams 2700 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-00-538-7814 MPN 3M261-3-6Close Tolerance Bolt
- 5306-01-044-5187 MPN VAL23607-6D16Shoulder Bolt
- 5306-01-044-6564 MPN VEH160271-3M-2Close Tolerance Bolt
- 5306-01-051-6032 MPN 8745833-03Machine Bolt
- 5306-01-057-3045 MPN VFK101G5-036Shear Bolt
- 5306-01-120-9418 MPN BACB30FD8-59Shear Bolt
- 5306-01-146-6139 MPN ST3M744-7-18Close Tolerance Bolt
- 5306-01-181-9713 MPN J334P08BMachine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-591-0195 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-7-12M | Arconic Global Fasteners & Rings, |
HT4027-7-12M | Sps Technologies, Llc |
HT4027-7-12M | Huck International, Inc. |
ST3M557-7-12M | Boeing Company, The |
ST3M557-7-12M | Valley-todeco, Inc. |
ST3M557-7-12M | Saturn Fasteners Inc |
ST3M557-7-12M | Heartland Precision Fasteners, Inc. |
ST3M557-7-12M | Houston Precision Fasteners I, Lp |
HT4027-7-12M | Sps Technologies, Llc |
ST3M557-7-12M | Camcar Llc |
HT4027-7-12M | Sps Technologies, Llc |
11923-7-12M | Reid Products Inc. |
WC4027-7-12M | West Coast Aerospace Inc |
HT4027-7-12M | Hi-shear Corporation |
HT4027-7-12M | Sps Technologies, Llc |
HT4027-7-12M | Alcoa Global Fasteners, Inc. |
ST3M557-7-12M | Linread Ltd |
HT4027-7-12M | Lisi Aerospace Canada Corp |
Stock Check
- NE: 3