NSN 5306-01-017-2569
Coaxial Connector
4.124 inches fastener length, double hexagon w/hole head style, 0.923 inches head height, width between flats: 1.062 inches .
Manufacturer part number MS21250-16042 for national stock number 5306010172569.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-017-2569.
-
MPN or Model
MS21250-16042
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.479 inches -
Fastener Length
4.124 inches -
Head Style
Double hexagon w/hole -
Head Height
0.923 inches -
Width Between Flats
1.062 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
0.222 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Thread Diameter
1.000 inches -
Grip Length
Between 2.615 inches and 2.635 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2817 MPN LS15267V3-19Machine Screw
- 5305-01-102-9840 MPN 3M926-3L9Close Tolerance Screw
- 5305-01-209-9377 MPN BACB30NT3K4Close Tolerance Screw
- 5305-01-512-8353 MPN 3M1170C3-6AFClose Tolerance Screw
- 5306-00-403-0175 MPN VFK100G-10038Shear Bolt
- 5306-00-616-8618 MPN 3M33-4-3AMachine Bolt
- 5306-00-782-8231 MPN BACB30GT6-36Shear Bolt
- 5306-01-046-1198 MPN ST3M497-3D20Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-017-2569 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-16042 | National Aerospace Standards |
MS21250-16042 | Sps Technologies, Llc |
MS21250-16042 | Sps Technologies, Llc |
MS21250-16042 | Sps Technologies, Llc |
VFK10G-16042 | Valley-todeco, Inc. |
MS21250-16042 | Alcoa Global Fasteners, Inc. |
MS21250-16042 | Arconic Global Fasteners & Rings, |
MS21250-16042 | Huck International, Inc. |
MS21250-16042 | Military Standards |
MS21250-16042 | Huck Intl Inc |
Stock Check
- NE: 500
- NS: 2