NSN 5306-01-054-6284
Coaxial Connector
1.945 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number PBF7521L6-22 for national stock number 5306010546284.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-054-6284.
-
MPN or Model
PBF7521L6-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.570 inches -
Fastener Length
1.945 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Head Minor Diameter
Between 0.578 inches and 0.585 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-510-5288 MPN LS15263V06-5Machine Screw
- 5305-00-538-7818 MPN BACB30LU4-8Close Tolerance Screw
- 5305-01-055-1146 MPN BACB30LU6-11Close Tolerance Screw
- 5305-01-349-0814 MPN VCL0009-6-9Close Tolerance Screw
- 5306-00-512-6421 MPN VEP220555-4-14Machine Bolt
- 5306-00-538-9082 MPN BACB30NE4H11Shear Bolt
- 5306-01-043-5723 MPN VEP220121-6F62Shear Bolt
- 5306-01-044-5192 MPN VAL23607-3-9Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-054-6284 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF7521L6-22 | Sps Technologies, Llc |
120978L6A22 | Sps Technologies, Llc |
AIC596L6-22 | Sps Technologies, Llc |
C7521L6-22 | Valley-todeco, Inc. |
VS3133L6-22 | Arconic Global Fasteners & Rings, |
C7521L6-22 | Sps Technologies, Llc |
C7521L6-22 | Lockheed Martin Corporation |
VS3133L6-22 | Alcoa Global Fasteners, Inc. |