NSN 5305-00-040-9431
High Torque Screw
Between 1.819 inches and 1.866 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number BM19019-4-23 for national stock number 5305000409431.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-040-9431.
-
MPN or Model
BM19019-4-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.438 inches -
Fastener Length
Between 1.819 inches and 1.866 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Thread Series Designator
Unjf -
Specification Data
08524-b-19019 manufacturers standard
More from these suppliers
- 5305-01-004-9528 MPN HT4027-3-3Close Tolerance Screw
- 5305-01-015-3365 MPN HT4025L3-9Close Tolerance Screw
- 5305-01-093-2450 MPN SC1810-3-9Close Tolerance Screw
- 5305-01-121-5498 MPN HT4067-4-11AClose Tolerance Screw
- 5305-01-144-2212 MPN HT4041-4-10-5YShoulder Screw
- 5305-01-190-4594 MPN SC1777V08-24Close Tolerance Screw
- 5305-01-234-5229 MPN HT4024L4-18Close Tolerance Screw
- 5305-01-242-5970 MPN HT4011-8-12Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-040-9431 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM19019-4-23 | Huck International, Inc. |
HT8140-4-23 | Arconic Global Fasteners & Rings, |
106830-4-23 | Sps Technologies, Llc |
HT295-4-23 | Alcoa Fastening Systems |
HT8140-4-23 | Alcoa Fastening Systems |
11905-4-23 | Reid Products Inc. |
ST3M454-4-23 | Boeing Company, The |
106830-4-23 | Sps Technologies Inc |
BM19019-4-23 | Huck Intl Inc |
HT295-4-23 | Hi-shear Corporation |
HT8140-4-23 | Alcoa Global Fasteners, Inc. |