NSN 5305-01-167-1089
High Torque Screw
Between 0.910 inches and 0.940 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30LR4 for national stock number 5305011671089.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-167-1089.
-
MPN or Model
BACB30LR4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-331-5809 MPN VCL0009-3-10Close Tolerance Screw
- 5306-00-106-6535 MPN R1394P015Machine Bolt
- 5306-00-812-7723 MPN 327B490P6Externally Relieved Body Bolt
- 5306-01-092-2095 MPN J643P16AMachine Bolt
- 5306-01-142-3545 MPN VAL23608-4D94Shoulder Bolt
- 5306-01-160-7551 MPN LS14965-5D55Shoulder Bolt
- 5306-01-385-2073 MPN VCG0016-6-46Shear Bolt
- 5306-01-422-1808 MPN VCJ0002-18-50DShear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-167-1089 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LR4 | The Boeing Company |
BACB30LR4-8 | Huck International, Inc. |
BACB30LR4-8 | Valley-todeco, Inc. |
BACB30LR4-8 | Federal Manufacturing Corporation |
BACB30LR4-8 | Sps Technologies, Llc |
BACB30LR4-8 | Arconic Global Fasteners & Rings, |
BACB30LR4-8 | Sps Technologies, Llc |
BACB30LR4-8 | Sps Technologies, Llc |
BACB30LR4-8 | The Boeing Company |
BACB30LR4-8 | Alcoa Global Fasteners, Inc. |
BACB30LR4-8 | Huck Intl Inc |
Stock Check
- NE: 23874
- NS: 317
- AR: 1
- SV: 4