NSN 5305-01-377-0946
High Torque Screw
Between 1.938 inches and 1.958 inches fastener length, flat chamfer head style, between 0.3737 inches and 0.3742 inches head diameter, head height: 0.263 inches .
Manufacturer part number 64494-4-24 for national stock number 5305013770946.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-377-0946.
-
MPN or Model
64494-4-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.438 inches and 0.458 inches -
Fastener Length
Between 1.938 inches and 1.958 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3737 inches and 0.3742 inches -
Head Height
0.263 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 1.500 inches and 1.520 inches -
Width Across Flats
Between 0.1875 inches and 0.1900 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 630 -
Material Specification
Ams5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-144-0309 MPN 106334-4-13Close Tolerance Screw
- 5305-00-216-3190 MPN 40-48-10R11Machine Screw
- 5305-00-505-2605 MPN LS15262V3-8Machine Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
- 5305-01-043-5749 MPN 66584-4-10Close Tolerance Screw
- 5305-01-062-1057 MPN BACB30RF6P10Close Tolerance Screw
- 5305-01-070-6695 MPN NAS1190-08P12BSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-377-0946 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
64494-4-24 | Sps Technologies, Llc |
C630-4-24 | Lockheed Martin Corporation |