NSN 5305-01-587-2262
High Torque Screw
1.406 inches fastener length, flat countersunk head style, 0.477 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number HT4027-5-14 for national stock number 5305015872262.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-587-2262.
-
MPN or Model
HT4027-5-14
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
1.406 inches -
Head Style
Flat countersunk -
Head Diameter
0.477 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Torque -
End Application
F-15 aircraft -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-364-7307 MPN LS15267V3-16Machine Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-004-9495 MPN AIC812-02-10Machine Screw
- 5305-01-012-2012 MPN A1C812-04-12Machine Screw
- 5305-01-047-0971 MPN AIC147-17Machine Screw
- 5305-01-054-6263 MPN AIC985-3-9PClose Tolerance Screw
- 5305-01-145-6956 MPN AIC209S-303Socket Head Cap Screw
- 5305-01-203-3201 MPN BACS12CK3U8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-587-2262 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-5-14 | Huck International, Inc. |
ST3M557-5-14 | Boeing Company, The |
HT4027-5-14 | Sps Technologies, Llc |
HT4027-5-14 | Arconic Global Fasteners & Rings, |
11923-5-14 | Reid Products Inc. |